Professional sat antenna 180 cm, heatable/aluminium design, powder coated, additional ZAS 181 and ZAS 186 are required

PDF PRODUCT EXPORT

CAS 180

Reflector in proven aluminium design, powder-coated, colour: White, matt
Feed system mounting consisting of aluminium hollow section (carrier arm) and aluminium plate (feed system installation)
Aluminium and stainless steel mast clamp
Optimum electrical specification thanks to offset feed with ultra-compact mechanical dimensions
Multi-feed systems can be created when used in conjunction with compact feed systems
As delivered, up to two compact feed systems can be attached to the carrier arm for reception of 3° to 6° (CAS 124) or 3° (CAS 180) offset satellites. For other combinations, a multi-feed adaptor plate is also required.
The following components aditional to the antenna are required: ZAS 181C feed system mounting (order no. 237500015) and ZAS 186 azimuth/elevation clamp (order no. 218676)
Azimuth fine tuning device for CAS 180/CAS 124: ZAS 189 (order no. 23710017)
Stub masts for CAS 180: ZSO 180 (order no. 23710014), ZSO 181 (order no. 23710015)

Type:	CAS 180
Diameter:	1.8 m
Reception range:	10,70-12,75 GHz
Antenna gain at 10.70-11.70 GHz:	44.5 dBi
Antenna gain at 11.70-12.50 GHz:	45.15 dBi
Antenna gain at 12.50-12.75 GHz:	45.5 dBi
Half power beam width:	0.9 °
Cross-polarisation decoupling:	> 30 dB
Wind load ¹):	3396 N
Clamping range of the mast clamp ZAS 180/ZAS 186:	75-114 mm
Setting range, elevation:	5-50 °
Setting range, azimuth:	360 °
Figure of merit (G/T):	See feed system
Max. dimensions, height:	1511 mm
Max. dimensions, protrusion (from centre of mast without feed system):	1900 mm
Dimensions width:	1980 mm
Packaging size (L x W x H):	2230 x 2120 x 390 mm
Weight approx. net/gross:	60,0/81,5 kg